Belkin Omniview SMB KVM-over-IP Switch F1DP108G - Manual (Page 67)

64
Using the Switch from a Remote Console
Function/Help-Page Keyboard Commands
Command Function
F4 Initiate AutoScan
èê Navigate to the next field
Insert Highlight field for editing
Esc Return to the main OSD menu
F10
Program Monitor-DDC2 settings to all Server
Interface Modules
Space Change options for selected field
Scan
This specifies whether the AutoScan feature is enabled or not. To enable or
disable the AutoScan feature, use the arrow keys to navigate to the Scan field
and press the space bar.
Scan Time
This specifies the amount of time the Switch remains on a server before switching
to the next server while in AutoScan mode. You may set the scan-time interval to
1, 2, 3, 5, or 10 seconds, or “off”. To change the scan time, use the arrow keys to
navigate to the Scan Time field, and type in the desired time interval (in seconds).
Security
This feature allows you to enable an administrator password to prevent
unauthorized users from accessing the OSD on the local console. When enabled,
switching can only be performed through the OSD. To enable or disable the
Security feature, use the arrow keys to navigate to the Security field and press
the space bar.
Note: If security is enabled, the user will not be allowed to switch remotely from
the quick-access toolbar.
Admin Password
This allows you to specify the administrator password needed to access the OSD
when the Security feature is enabled. To set the password, use the arrow keys to
navigate to the Admin-Password field and type in the desired password. You may
use up to eight uppercase characters for the password. Password characters are
not case-sensitive. Press “Esc” or use the arrow keys to navigate to fields and
save the password. Use the “Back Space” key to erase the password.