Lukas P 640 TG - Manual (Page 13)

13
5.5 Frames
As a general principle, all hydraulic units from the rescue equipment range come with a
frame to make them easier to transport.
5.5.1 Standard frame
The standard frames vary depending on the type of hydraulic unit. They range from simple
handles through to bow-type handles all the way to a frame adapted according to the unit.
It therefore cannot be guaranteed that the entire unit can fit inside the exterior dimensions of
the frame of standard frames.
5.5.2 D frame
As a general principle, the D frame dimensions are 500 mm x 440 mm x 480 mm.
On D frames, all parts of the unit are located within the frame.
In addition, there are mounting possibilities for connection hose reels (one double and two
single hose reels).
The dimensions mean that this frame fits into in the standard fixing devices of rescue service
vehicles.
5.5.3 U frame
The U frame differs from the D frame with regard to outer dimensions and shape. There are
currently no mounting possibilities for hose reels on this frame.