Lukas P 640 TG - Manual (Page 39)

39
7. Perform a function test with the hydraulic unit (as described in the chapter entitled
"Maintenance and service").
(Recommendation: use the LUKAS test kit, including testing instructions, for the function
test).
12.3.8 Labels
All damaged and/or illegible labels (safety notices, type plate, etc.) must be renewed.
Procedure:
1. Remove damaged and/or illegible labels.
2. Clean the surfaces using acetone.
3. Attach new labels.
Make sure that the labels are attached in the right position. If you are no longer sure about
this, contact your authorised LUKAS dealer or LUKAS directly.