Lukas P 640 TG - Manual (Page 6)

6
Comply with all the instructions
regarding safety and danger
on the equipment and in the
operating instructions.
All the instructions regarding
safety and danger on the
equipment are to be kept
complete and in a legible
condition.
Please ensure that all safety
covers are present on the
equipment and that they are in
proper and adequate condition.
Any method of operation which
impairs safety and/or stability of
the equipment is prohibited!
Safety devices may never be
deactivated!
The maximum operating
pressure set on the equipment
must not be changed!
Before the equipment is
switched on / started up, and
during its operation, it must
be ensured that nobody is
endangered by the operation of
the equipment.
Comply with all specified
dates or dates specified in the
operating instructions pertaining
to regular checks / inspections
of the equipment.
When working close to live
components and cables,
suitable measures must be
taken to avoid current transfers
or high-voltage transfers to the
equipment.
Only original LUKAS
accessories and spare parts
may be used for repairs.
When working with this
equipment or when transporting
it, ensure that you do not get
caught up in the hose or cable
loops and trip.
The build-up of static charge
with the potential consequence
of spark formation is to be
avoided when handling the
equipment.
When working with combustion
engine pumps, never touch
the motor and exhaust system,
since there is a risk of burning.
Motor pumps may not be used
in explosion hazard areas!
Combustion engines must not
be used in enclosed spaces, as
there is a danger of poisoning
and/or asphyxiation!
If fuel for combustion engines
is spilled, this fuel must be
removed completely before
starting the motor.
Filling up during operation of
the combustion engine is strictly
prohibited!