Lukas P 640 TG - Manual (Page 15)

15
Assembly of coupling systems 6.
6.1 Mono-couplings
6.2 Direct connection
Only female mono-coupling halves are mounted
on the connecting block of the hydraulic unit.
The female coupling is screwed into the valve
block with a tightening torque of M
A
= 40 Nm.
On the connecting block of the hydraulic unit, the connection nipple (male) is screwed into the
valve block with a tightening torque of M
A
= 40 Nm.
Subsequently, suitable locking elements (e.g. locking ball with nut) must be screwed onto the
connection nipples or the hoses must be connected immediately.