IKA C 1 Package 1/10 - Manual (Page 12)

12
System start
A menu language has been selected, the splash screen will
change to the following information window:
INFO: Exceed the number of ignitions devices, the maximum
recommended number of ignition, a pressure test must
be performed with the device.
An additional information window is displayed.
See capture - „Pressure test“
INFO: If the oxygen pressure is too low, a corresponding user
information is displayed.
See capture - „Oxygen pressure too low“
By an verification (pressing the multifunction element) another
user information on the proper use of the system is shown.
Refer to the chapter „Care and Maintenance“.
INFO: When the system is closed, a purge routine is started.
See capture - „System check“
INFO: Has been selected in the settings menu under accessories
heating option, but this is not detected, user information
is displayed.
See capture - „Heating detection - System start“
Switching on the system (in the open state)
After switching on the calorimeter, first the initial screen with the
IKA ® logo, the calorimeter-type and the software and firmware
version.
INFO: Upon initial system start, the menu language must be
selected.
See capture - „Selection of language“
Selection of language
C1 092014