IKA C 1 Package 1/10 - Manual (Page 2)

2
Explication of warning symbols
EN
We declare under our sole responsibility that this product is in compliance with the regulations
2006/95/EG; 2004/108/EG; 97/23//EG (Article3, 3) and 2011/65/EU and conforms to the standards or standardized documents:
EN 61010-1:2010 and EN 61326-1:2006.
CE - Declaration of Conformity
DANGER
CAUTION
WARNING
This symbol indicates information which is essential for the safety of your health.
Failure to observe this information can cause damage to health and injuries.
This symbol indicates information which is important for ensuring that the appli-
ance functions without any technical problems. Failure to observe this information
could damage the calorimeter system.
This symbol indicates information which is important for ensuring that calori-metric
measurements are performed effi ciently and for using the calorime-ter system.
Failure to observe this information can result in inaccurate measurements.
General hazard.
Read the operating instructions !
You will be liable for freight costs..
The warranty does not cover worn out parts, nor does it apply
to faults resulting from improper use, insufficient care or
maintenance not carried out in accordance with the instructions
in this operating manual.
Please read these operating instructions carefully. IKA ® only
consider themselves to be responsible for the safety, reliability and
performance of the appliance when
• the appliance has been operated in accordance with the
operating instructions,
• only persons authorised by the manufacturer interfere with the
appliance,
• only original parts and original accessories are used for
repairs.
The calorimeter system may be opened only by an authorised
Service Agent or Customer Service Centre.
If service is required, we recommend that you contact our
customer service department. Furthermore, we refer you to the
applicable safety conditions and accident requirements.
IKA ® is not responsible for damages or costs resulting from
accident, improper use of the device or impermissible modifica-
tions, repairs or renovations.
Read the operation instructions completely before
starting up and follow the safety instructions.
Keep the operation instructions in a place where they can be
accessed by everyone.
Ensure that only trained staff work with the appliance.
Follow the safety instructions, guidelines, occupational health and
safety and accident prevention regulations.
In this chapter you can fi nd out how to work through these
Operating Instructions most effectively to be able to work reliably
with the calorimeter system.
The instructions in the section „Safety instructions“ must
be complied with.
The chapters are designed for you to work through them in order.
The section „Transport, storage“ is relevant for system reliability
and for ensuring high measuring accuracy.
The calorimeter system is ready to perform measurements once
you have completed the procedures in the section „Setting up
and commissioning“: - „Preparing a measurement“ and „Starting
a measurement“.
Numbers 1, 2, 3 etc. indicate operating instructions in the
following sections. These must always be carried out in the specifi
ed sequence.
Warranty and liability
In accordance with IKA ® warranty conditions, the warranty period
is 12 months. For claims under the warranty please contact your
local dealer. You may also send the machine direct to our factory,
enclosing the delivery invoice and giving reasons for the claim.
User notes
C1 092014