IKA C 1 Package 1/10 - Manual (Page 32)

32
Selection of accessories
• Heating:
Use of heating during the measurement C1.2
• Combustible crucible:
yes / no
Weight input of the combustible crucible in the submenu „New
measurement“ can be done manually or by data transfer from
the balance.
• Printer:
Using a serial printer.
Selection option between:
• off: no expression
• briefly: expression
• standard: result expression with temperature values
• Service Information:
Service information is outputted via the serial interface
• Balance:
Selecting a balance type.
Selection option between:
• out
• Sartorius/Kern
• Mettler-Toledo
• Ohaus
Accessories
Chiller test
Maintenance
Viewing maintenance programs that can be performed by the
user at regular intervals.
Inner vessel and the inner vessel bottom lift out and set
aside.
Maintenance menu:
The system must be open to performing the maintenance programs.
The maintenance menu can be reached at Menu > Maintenance and contains the following points
Check whether the cooling water tem-
perature within the specified range of
19,5 +/- 1,5 °C at the wor-
king temperature 22°C
or
27,5 +/- 1,5 °C at the wor-
king temperature 30°C
is located.
C1 092014