IKA C 200 - Manual (Page 10)

10
4 Installation and starting up
4.1 Calorimeter C 200
4.2 Installation
 Measuring cell cover
 Tank fillers
 Display
 Keyboard
 Fill level display
 Connecting peripherals
When connecting peripherals make sure that
both they and the calorimeter are switched off at
ON/OFF switch .
All the connections for draining as well as the pe-
ripherals are on the back of the appliance.
 Connecting the table power supply
Connect the calorimeter to the table power sup-
ply (4-pin plug ). Check that the voltage infor-
mation on the rating plate of the power supply
unit matches your mains supply. Connect the po-
wer line of the plug to the voltage source.
 PC connector
 Printer connector
 ON/OFF switch
 Table power supply connector
 Table power supply