JLG 1500SJ Operator Manual User Manual
Operation and safety manual, Boom lift models 1500sj, Ansi
Advertising
Table of contents
Document Outline
- Section 1. SAFETY PRECAUTIONS
- Section 2. USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
- Section 3. MACHINE CONTROLS AND INDICATORS
- Section 4. MACHINE OPERATION
- 4.1 Description
- 4.2 Boom Operating Characteristics and Limitations
- 4.3 CAPACITY SELECT
- 4.4 ENGINE OPERATION
- 4.5 Traveling (Driving)
- 4.6 STEERING
- 4.7 EXTENDING THE AXLES
- 4.8 PLATFORM
- 4.9 Boom
- 4.10 Function Speed control
- 4.11 EMERGENCY TOWING
- 4.12 SHUT DOWN AND PARK
- 4.13 LIFTING AND TIE DOWN
- 4.14 STOWING THE JIB FOR TRANSPORT
- Section 5. LCD DISPLAY PANEL - GENERATION 1 & 2
- 5.1 IDentification
- 5.2 LCD Display Panel
- 5.3 Generation 1 LCD Display Panel Screens
- Boot Up Splash Screen
- Default Screen
- Conditional Icons
- CAN Communication Error Screen
- Serviceable Fault Indication Screen
- Keyswitch in Ground Control Mode Screen
- Keyswitch in Ground Control Mode Screen with Operational Faults
- Operational Fault - No Graphics Screen
- Operational Fault - With Graphics Screen
- Operational Fault - Footswitch Open Screen
- Out of Transport - Axles Retracted
- Operational Fault - Transport Swing Fault Screen
- Envelope Speed Reduction Screen
- Operational Fault - Envelope Violation Fault Screen
- Operational Fault - Over/Under Moment Fault (DTC 0017/ 0018)
- 5.4 Generation 2 LCD Display Panel Screens
- Boot up Splash Screen
- Machine Operating Screen
- KeySwitch In Ground Mode:
- Function Speed
- CAN Bus Lost
- Take Foot Out
- Put Foot In
- BCS Lamp On
- Broken Cable
- Platform Level
- Platform Overload
- Capacity Mode Error
- Swing DTCs
- Jib Unlocked
- Jib Locked
- Chassis Status
- Machine Tilted Mode
- Envelope Status
- Machine Model Unknown
- 5.5 Operational Fault code Listing
- Section 6. EMERGENCY PROCEDURES
- Section 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
- Section 8. INSPECTION AND REPAIR LOG