JLG 1500SJ Operator Manual - Manual (Page 185)

SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121261 – JLG Lift – 7-25
4. Wheel nuts should be torqued before first road use and after
each wheel removal. Check and torque every 3 months or
150 hours of operation.
7.4 SUPPLEMENTAL INFORMATION
The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/EC
and is only applicable to CE machines.
For electric powered machines, the equivalent continuous A-
Weighted sound pressure level at the work platform is less than
70dB(A)
For combustion engine powered machines, guaranteed Sound
Power Level (LWA) per European Directive 2000/14/EC (Noise
Emission in the Environment by Equipment for Use Outdoors)
based on test methods in accordance with Annex III, Part B,
Method 1 and 0 of the directive, is 104 dB.
The vibration total value to which the hand-arm system is sub-
jected does not exceed 2,5 m/s 2 . The highest root mean square
value of weighted acceleration to which the whole body is sub-
jected does not exceed 0,5 m/s 2 .
Table 7-15. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage 2nd Stage 3rd Stage
45 ft. lbs.
(60 Nm)
100 ft. lbs.
(140 Nm)
180 ft. lbs.
(252 Nm)