JLG 1500SJ Operator Manual - Manual (Page 60)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-16 – JLG Lift – 3121261
19. Soft Touch Indicator (If Equipped)
Indicates the Soft Touch bumper is
against an object. All controls are cut
out until the override button is pushed, at which time con-
trols are active in the Creep Mode.
20. Platform Rotate
Allows the operator to rotate the platform to
the left or right.
21. Lock Pin Indicator
When illuminated, indicates the jib is
centered and the jib lock pin is
engaged. When blinking, indicates the
jib is in the process of being stowed or centered. The indica-
tor is off when the lock pin is disengaged and the jib is
stowed (machine in transport position).
22. Function Speed Control
This control affects the speed of main boom
telescope, jib telescope, and jib lift. Turning
the knob all the way counterclockwise until
it clicks puts drive, main lift, platform rotate,
and swing into creep mode.
NOTE: To operate the Main Boom Lift/Swing joystick,
pull up on the locking ring below the handle.
NOTE: The Main Boom Lift/Swing joystick is spring
loaded and will automatically return to neutral
(off) position when released.
23. Main Lift/Swing Controller
Provides main lift and swing. Push
forward to lift up, pull backward
to boom down. Move right to
swing right, move left to swing
left. Moving the joystick activates
switches to provide the functions
selected.