JLG 1500SJ Operator Manual - Manual (Page 46)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-2 – JLG Lift – 3121261
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF POSITION WHEN RELEASED.
Ground Control Station
(See Figure 3-1., Ground Control Station)
NOTE: The Function Enable switch must be held down in
order to operate Main Boom Telescope, Swing,
Main Lift, Jib Lift, Platform Level Override, Plat-
form Rotate, and Jib Telescope functions.
1. Indicator Panel
The Indicator Panel contains indicator lights that signal
problem conditions or functions operating during machine
operation.
2. Jib Telescope Control
Provides extension and
retraction of the jib.
3. Platform Rotate
Provides rotation of the plat-
form.