JLG 1500SJ Operator Manual User Manual
Page 58
SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-14
– JLG Lift –
3121261
10.
Capacity Select
This switch allows the operator to select
between an operating envelope with a 500 lb.
(227 kg for ANSI markets and 230 kg for CE and
Australia markets) capacity restriction or a 1000
lb. (454 kg for ANSI markets and 450 kg for CE
and Australia markets) capacity restriction.
11.
Drive Orientation Override
When the boom is swung over the rear tires
or further in either direction, the Drive Orien-
tation indicator will illuminate when the drive
function is selected. Push and release the
switch, and within 3 seconds move the Drive/Steer control
to activate drive or steer. Before driving, locate the black/
white orientation arrows on both the chassis and the plat-
form controls. Move the drive controls in a direction match-
ing the directional arrows.
NOTE:
To operate the Drive Joystick, pull up on the lock-
ing ring below the handle.
NOTE:
The DRIVE control levers are spring-loaded and will automati-
cally return to neutral (OFF) position when released.
12.
Drive/Steer
Push forward to drive forward,
pull back to drive in reverse.
Steering is accomplished via a
thumb-activated rocker switch on
the end of the steer handle.
13.
Main Telescope
Provides extension and retraction of the main
boom.