JLG 1500SJ Operator Manual - Manual (Page 161)

SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121261 – JLG Lift – 7-1
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.1 INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121262
Illustrated Parts Manual ................................................................3121263
7.2 OPERATING SPECIFICATIONS AND PERFORMANCE
DATA
Operating Specifications
Table 7-1. Operating Specifications
Capacity - ANSI
Unrestricted
Restricted
500 lbs (227 kg)
1000 lbs (454 kg)
Capacity - CE & Australia
Unrestricted
Restricted
500 lbs (230 kg)
1000 lbs (450 kg)
Maximum Travel Grade, stowed
Position (Gradeability) see Figure 4-3. 40%
Maximum Travel Grade, stowed
Position (Side Slope) see Figure 4-3. 5°
Maximum Drive Speed 3.0 mph (4.8 kph)
Gross Machine Weight - Approximate 48000 lbs. (21772 kg)
Ground Bearing Pressure - Maximum 113 psi (7.94 kgcm 2 )