JLG 1500SJ Operator Manual - Manual (Page 117)

SECTION 5 - LCD DISPLAY PANEL - GENERATION 1 & 2
3121261 – JLG Lift – 5-21
Operational Fault - Footswitch Open Screen
The Footswitch Open Screen appears if the JLG Control System
has sensed a fault that is due to the operator having the foot-
switch open. In this condition, no functions are operable as
shown by the red X’s on the display screen. This screen will
remain until the operator releases the restricted function. The
operator can then operate the function by pushing the foot-
switch and operating the function again. In the lower right hand
corner, a check mark in a green circle indicates no serviceable
faults are present. If a serviceable fault is present, the numeric
fault code with a safety alert symbol is displayed. Multiple faults
will display in succession. Check the Service Manual for the spe-
cific fault code.