Training supervision, Operator responsibility, 2 preparation, inspection, and maintenance – JLG 15/20MSP Operator Manual User Manual
Page 20: Training supervision -2 operator responsibility -2, 2 preparation, inspection, and maintenance .2-2
SECTION 2 - PREPARATION AND INSPECTION
2-2
– JLG Lift –
3121230
Training Supervision
Training must be done under the supervision of a qualified person
in an open area free of obstructions until the trainee has devel-
oped the ability to safely control and operate the machine.
Operator Responsibility
The operator must be instructed that he/she has the responsibility
and authority to shut down the machine in case of a malfunction or
other unsafe condition of either the machine or the job site.
NOTE: The Manufacturer or Distributor will provide qualified peo-
ple for training assistance with the first unit(s) delivered
and from that time forward as requested by the user or
his/her personnel.
2.2 PREPARATION, INSPECTION, AND
MAINTENANCE
The following table covers the periodic machine inspections and
maintenance recommended by JLG Industries, Inc. Consult local
regulations for further requirements for aerial work platforms. The
frequency of inspections and maintenance must be increased as
necessary when the machine is used in a harsh or hostile environ-
ment, if the machine is used with increased frequency, or if the
machine is used in a severe manner.