JLG 15/20MSP Operator Manual - Manual (Page 52)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3-26 – JLG Lift – 3121230
SIDE ENTRY PLATFORM - w/ FOLDING MATERIAL TRAY
1. Swing Side Entry Gates 3. Platform Control Console
2. Lanyard Attach Point - (on side of 4. Material Tray
mast or lug at right rear upper rail)
2
1
3
4
2
Table 3-3. Max. Capacity with
Side Entry Platform w/Folding Material Tray Installed
SPEC Model (1)
Platform
Capacity
Tray Capacity
Combined
Capacity
ANSI/
CSA
15MSP
300 lb.
(136 kg)
150 lb.
(70 kg)
450 lb.
(206 kg)
20MSP
300 lb.
(136 kg)
150 lb
(70 kg)
450 lb.
(206 kg)
CE 20MVL
250 lb.
(115 kg)
100 lb.
(45 kg)
350 lb.
(160 kg)
AUS
15MVL
350 lb.
(160 kg)
150 lb.
(70 kg)
500 lb.
(230 kg)
20MVL
250 lb.
(115 kg)
100 lb.
(45 kg)
350 lb.
(160 kg)
(1) This platform is only available on models shown for the applicable spec-
ification.
NOTE: Australian Specification Machines ONLY - The SIDE
ENTRY PLATFORM w/FOLDING MATERIAL TRAY
includes a gate release/latch mechanism which is
released by pressing down on the handles mounted to
the top rail of both entry gates. Releasing the handles
will latch the gates when closed.