JLG 15/20MSP Operator Manual - Manual (Page 40)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3-14 – JLG Lift – 3121230
34 —
Aux. #1 - Platform Gate Open or
No Pressure on the Platform
Enable switch. Close Platform Gate or Depress
Platform Enable switch during
machine operation.
35 —
Aux. #1 - Platform Enable
switch depressed during
Machine Power-up. Do Not Press on Platform Enable
switch during Machine Power-
Up.
NOTE: The fault conditions shown above are fault conditions which the Operator may be able to resolve. Should a fault occur and be displayed on the LCD
screen which cannot be corrected at the Operator’s level, the problem must be referred to a qualified JLG mechanic. A complete table of Fault
Codes is listed in the TroubleShooting Section of the Service and Maintenance Manual.
Table 3-2. LCD Display - Operation Fault Conditions (Continued)
FAULT
CODE
PLATFORM
LEDS
FLASHING
LCD SYMBOL SCREEN LCD TEXT SCREEN
FAULT DESCRIPTION/
MACHINE CONDITION
LOOK FOR THIS