JLG 15/20MSP Operator Manual - Manual (Page 45)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3121230 – JLG Lift – 3-19
Drive/Lift Mode Selector Switch Horn Button
Joystick Function Enable Lever
Drive/Lift Mode
Selector Switch
1. LIFT Mode
2. DRIVE Mode
PUSH the rocker
switch to select mode
of operation.
Whichever mode is
selected the appropri-
ate LED indicator on the
display panel below will
light up showing which
mode has been acti-
vated for joystick oper-
ation.
IMPORTANT:
The selected mode
will only remain
active for 5 seconds
if the function is not
operated.
1 2
When the machine is
powered on, pressing
this button will sound
the Horn.
The Function Enable lever on
the front of the joystick con-
trol, must be engaged and
held in during any joystick
operation.