JLG 15/20MSP Operator Manual - Manual (Page 48)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3-22 – JLG Lift – 3121230
Lift Mode
IF THE TILT ALARM WARNING HAS BEEN ACTIVATED WHILE DRIVING
WITH THE PLATFORM ELEVATED, LOWER PLATFORM COMPLETELY
AND DRIVE TO A FIRM LEVEL SURFACE.
ENSURE THE AREA BENEATH THE PLATFORM IS FREE OF PERSON-
NEL PRIOR TO LOWERING THE PLATFORM.
1. Activate the Lift Mode
using the Drive/Lift Mode
Selector switch.
2. Platform LIFT DOWN
Direction
3. Platform LIFT UP
Direction
Within 5 seconds of acti-
vation - ENGAGE and
HOLD the JOYSTICK
ENABLE LEVER then
move the joystick in the
direction of LIFT (3) OR
LOWER (2).
2
3