JLG 15/20MSP Operator Manual - Manual (Page 26)

SECTION 2 - PREPARATION AND INSPECTION
2-8 – JLG Lift – 3121230
machine will indicate a tilt condition if any
attempt is made to elevate the platform.
• Drive Speed Reduction Limit - When platform
is elevated more than 1.5 to 2 ft. (.5m) drive
speed is cut to 1/4 of platform lowered drive
speed.
• Platform Joystick Enable Trigger - The
machine will not operate (drive or lift) unless this
switch is pressed and held during drive or lift
operation.
d. Ensure all machine functions are disabled when the
Emergency Stop Button is activated (pressed in).