JLG 15/20MSP Operator Manual - Manual (Page 70)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3-44 – JLG Lift – 3121230
9. Remove the rug from the Rug Carrier Accessory. If required,
use an assistant to unload the rug from the Rug Carrier
Accessory Arms.
10. Replace the Rug Hanger Accessory arms to the stowed posi-
tion for normal operation.
THE RUG CARRIER ACCESSORY ARMS MUST BE LOCKED IN THE STOWED
POSITION WHEN NOT IN USE.
EXTREME CAUTION MUST BE EXERCISED AT ALL TIMES WHILE THE RUG
CARRIER ACCESSORY IS IN USE (DRIVING, RAISING AND LOWERING) TO
PREVENT OBSTACLES AND PERSONNEL FROM STRIKING THE LOAD.
WHEN DRIVING WITH A RUG WITHIN THE RUG CARRIER ACCESSORY, THE
RUG MUST BE PROPERLY SECURED TO PREVENT INADVERTENT MOTION
OR MOVEMENT OF THE RUG AND MUST NOT EXCEED THE RATED CAPAC-
ITY OF THE RUG CARRIER ACCESSORY.
NEVER OVERLOAD THE RUG CARRIER ACCESSORY. MAXIMUM CAPACITY
OF THE RUG CARRIER ACCESSORY IS 150 LBS.
THE COMBINED WEIGHT OF PERSONNEL, MATERIALS, EQUIPMENT PLUS
ANY LOAD ON THE RUG CARRIER ACCESSORY MUST NOT EXCEED THE
MAXIMUM CAPACITY OF THE PLATFORM.
NEVER USE A RUG CARRIER ACCESSORY THAT HAS DAMAGE OR LOOSE
MOUNTINGS. IMMEDIATELY REPORT ANY DAMAGE TO APPROPRIATE
PERSONNEL. DISCONTINUE USE OF THE RUG CARRIER ACCESSORY
UNTIL ALL DISCREPANCIES HAVE BEEN CORRECTED.