JLG 15/20MSP Operator Manual - Manual (Page 17)

SECTION 1 - SAFETY PRECAUTIONS
3121230 – JLG Lift – 1-7
Crushing And Collision Hazard
• Personal protection equipment must be worn by all oper-
ating and ground personnel.
• Check work area clearances above, on sides, and bottom
of platform while driving and lifting or lowering platform.
• During operation, keep all body parts inside platform rail-
ing.
• Always post a lookout when driving in areas where vision
is obstructed.
• Keep non-operating personnel at least 6 ft. (1.8m) away
from machine during all driving operations.
• Limit travel speed according to conditions of ground sur-
face, congestion, visibility, slope, location of personnel,
and other factors causing hazards of collision or injury to
personnel.
• Be aware of stopping distances in all drive speeds.
• Do not drive at high speeds in restricted or close quarters
or when driving in reverse.
• Exercise extreme caution at all times to prevent obstacles
from striking or interfering with operating controls and per-
sons in the platform.
• Ensure that operators of other overhead and floor level
machines are aware of the aerial work platform’s pres-
ence. Disconnect power to overhead cranes.
• Warn personnel not to work, stand, or walk under a raised
platform. Position barricades on floor as necessary.