JLG 15/20MSP Operator Manual - Manual (Page 27)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3121230 – JLG Lift – 3-1
SECTION 3. MACHINE CONTROLS, INDICATORS AND OPERATION
3.1 GENERAL
THE MANUFACTURER HAS NO DIRECT CONTROL OVER MACHINE APPLI-
CATION AND OPERATION. THE USER AND OPERATOR ARE RESPONSIBLE
FOR CONFORMING WITH GOOD SAFETY PRACTICES.
This section provides the necessary information needed to
understand control function and operation.
3.2 MACHINE DESCRIPTION
The JLG MVL/MSP Model Lifts are electric self-propelled
machines with an aerial work platform mounted to an elevating
aluminum mast mechanism. The personnel lift’s intended purpose
is to provide personnel access to areas above ground level. The
MSP model lift is intended for stock picking purposes in retail
stores or warehouses.
The primary control station is located in the platform. From the
Platform Control Console the operator can drive the machine and
raise or lower the platform.
The controls of the programmable Ground Control Station are to
be used during machine power-up, machine maintenance or in
case of emergency should the operator in the platform be unable
to lower the platform.
Vibrations emitted by these machines are not hazardous to an
operator working in the platform.
The continuous A-Weighted sound pressure level at the work plat-
form is less than 70db (A).