JLG 15/20MSP Operator Manual - Manual (Page 56)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3-30 – JLG Lift – 3121230
3.9 FALL PROTECTION - LANYARD ATTACHMENT
JLG INDUSTRIES, INC. RECOMMENDS THE OPERATOR IN THE PLATFORM
WEAR A FULL BODY HARNESS WITH A LANYARD ATTACHED TO AN
AUTHORIZED LANYARD ANCHORAGE POINT.
The lanyard attach point for MVL/MSP machines depends on the
type of platform attached to the machine.
• Quick Change (removable) platforms use a lanyard attach
point located on the lower left side of the mast header, just
behind the platform (see illustration).
• Fixed platforms (bolted permanently to the mast), have lan-
yard attach points located on the mid or upper platform rail
at the rear of the platform. See specific platform illustration
starting at “PLATFORM CONFIGURATIONS” on page 3-24.
AFTER ENTERING THE PLATFORM, BEFORE BEGINNING OPERATION
ALWAYS CLOSE THE PLATFORM ENTRY GATE(S).