Entering password, Programming mode selection – JLG 15/20MSP Operator Manual User Manual
Page 98
Advertising
SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
5-18
– JLG Lift –
3121230
Entering Password
Programming Mode Selection
1. The Brake Release button (1) moves the box from left
to right to select which digit to change.
2. Platform UP button (2) increases the numerical digit.
3. Platform DOWN button (3) decreases the numerical
digit.
4. Change all five digits (4) to match password level, then
press the Brake Release button (1) again.
1
2
3
00000
4
1. Use Platform UP/DOWN buttons (1) to move the selec-
tion box (2) up or down to select item to program.
2. Press the Brake Release button (3) to enter selected
mode then move on to Selecting Programmable Item
to adjust.
1
2
3
Advertising
This manual is related to the following products: