JLG X20J Plus Operator Manual - Manual (Page 106)

B) Moving the undercarriage with the machine not aligned
‑ Open the electrical components compartment.
‑ Place the emergency key on the electrical components
compartment, removing it from the machine’s key holder,
where it is sealed with lead (see photo).
‑ Turn the emergency key clockwise and hold it in position
(see sticker).
The display on the remote control shows the
safety device BYPASS icon.
‑ Use the travel control with extreme care to avoid causing damage to the machine or
people.
Move to a suitable position for carrying out procedure A, used to realign the machine.
‑ At the end of the operation release the key, remove it, put it back in its original position
and close the electrical components compartment.
‑ The electronic control board records every time the safety device bypass key is used.
BOOM LIFT MODELS X20JPLUS
JLG
102 X20JPR0020413
O PERATION ALLOWED ONLY TO REACH THE CONDITIONS NECESSARY TO PERFORM THE PROCEDURE
DESCRIBED UNDER POINT A
). A
NY OTHER USE IS PROHIBITED
.