JLG X20J Plus Operator Manual - Manual (Page 58)

BUTTON 2:
Enters the menu for the manual movements of the individual stabilisers.
BUTTONS 3‑9:
Used to extend and narrow the tracked undercarriage.
BUTTON 4
Used to enable control of the emergency descent from the basket. Confirmation that the ope‑
ration is enabled is displayed on the screen in position 8.
BUTTON 5:
Used to select the travel speed and the engine/motor speed.
There are three speeds available:
• SLOW: engine at 1,500 rpm for the operation of the aerial part, at 2,200 rpm for the operation of
the carriage. Minimum possible speed for the tracks.
• NORMAL: variable rpm according to the selected movement. Travel motors always with maxi‑
X20JPR0020413 54
BOOM LIFT MODELS X20JPLUS
JLG