JLG X20J Plus Operator Manual - Manual (Page 83)

79
The machine is equipped with an automatic system of inclination sensing during transla‑
tion, the possible translation speeds are adjusted according to the weight in basket,
undercarriage closed or opened, position of JIB and inclination of the ground. In case of
approach to dangerous inclinations for machine’s stability, both lateral and longitudinal, a
beeper is activated and afterwards the translation is forbidden. The only allowed operation
to exit this condition is activate the consent to movement pressing button 8 on remote con‑
trol and bring the machine in safety condition reducing the inclination, it is absolutely for‑
bidden to increase the inclination of the machine as it could cause overturning with conse‑
quent danger for operator or people nearby the machine.
The safety systems introduced to limit the risks of the manoeuvre are a valid help to the ope‑
rator but unfortunately cannot eliminate dangers caused by improper or regardless use of
the machine.
It is operator’s responsibility to run the machine safely, checking the ground conditions, eva‑
luating the obstacles and dangers in the working area and following the rules of this manual
and indications on decals and display of the machine.
Do not use the second travel speed to drive on sloping or uneven ground and when not
driving in a straight line.
BOOM LIFT MODELS X20JPLUS
JLG
X20JPR0020413
IMPORTANTE
WARNING
IMPORTANTE
WARNING
IMPORTANTE
WARNING