JLG X20J Plus Operator Manual User Manual
Page 107
103
BOOM LIFT MODELS X20JPLUS
JLG
X20JPR0020413
6.6 ELECTRICAL DISCONNECTION OF THE REMOTE CONTROL
The electrical disconnection/connection of the remote control MUST be carried out exclu‑
sively with the motor key in position OFF and with the mains power disconnected.
•
Disconnect the cable from the remote control using the corresponding screw connection.
• Make sure there is no moisture in the remote control connector and close the remote
control sealing plug.
•
Make sure there is no moisture in the electric cable connector and close the electric cable
sealing plug.
NOTE
: both connectors must be closed with the respective sealing plugs to prevent moisture
from entering.
To reconnect the remote control, follow the same process in the reverse order.
IMPORTANTE
WARNING