JLG X20J Plus Operator Manual User Manual

Page 162

Advertising
background image

BOOM LIFT MODELS X20JPLUS

JLG

158

X20JPR0020413

ESSICAE A

If both are ON, the safety devices for the aerial part have been disabled using special
key.

ESSICAE B
ESSICCA A

If both are ON, the safety devices for the carriage have been disabled using special
key.

ESSICCA B
EM.TERRA A

If both are ON, the emergency STOP from the ground has NOT been pressed.

EM.TERRA B
FOTOA

If both are ON, the photoelectric cells are aligned

FOTOB
EMTEL TERR

If ON, the emergency STOP on the remote control from the ground is NOT pressed.

ST1‑2 CHIUSI

If ON, stabilisers 1‑2 are completely raised and pressurised.

ST3‑4 CHIUSI

If ON, stabilisers 3‑2 are completely raised and pressurised.

ALL.TEMP A

If both are ON, the outside temperature probe is in alarm condition (Russian version
only).

ALL.TEMP B

ALTERN.

ON or OFF depending on whether the motor is on or off.

COM EMERG

If ON, the emergency controls are active (key turned on panel).

MICROFUNI

If ON, both cables are working.

MARCIA MOTO If ON, the motor start button on the ground position is pressed.
TEMP.MOTO

If OFF with motor on, the alarm is active.

PRESS.MOTO

If ON with motor on, the alarm is active

TER/NAV A

If ON, the remote control from the ground position has been enabled using special

key.

MICROJIB A

If both are ON, the jib arm is completely folded.

MICROJIB B
PEDALE

If ON, the pedal in the basket is pressed (pedal version only).

EMNAV A

If both are ON, the emergency STOP on the remote control in the basket is NOT pres‑
sed.

EMNAV B
POSM 1A

If both are ON, stabiliser 1 is lowered (stabilisation position).

POSM 1B
POSM 2A

If both are ON, stabiliser 2 is lowered (stabilisation position).

POSM 2B
POSM 3A

If both are ON, stabiliser 3 is lowered (stabilisation position).

POSM 3B
POSM 4A

If both are ON, stabiliser 4 is lowered (stabilisation position).

POSM 4B
TEL.CESTO

If ON, the remote control is in place in the basket.

INCLIN. X

Indicates the incline of the X axis in tenths of a degree

INCLIN. Y

Indicates the incline of the Y axis in tenths of a degree

PESO.

Indicates the weight in the basket in kg.

POS. 1E2

ND

POS. 3

Indicates the stroke of the 3rd arm cylinder in tenths of a millimetre

ROTAZ A

ND

MOTORE RPM

Indicates the motor speed.

CORRENTE A

Indicates the power supply to the proportional valve.

CORRENTE B

Indicates the power supply to the proportional valve.

CORRENTE C

Indicates the power supply to the proportional valve.

TEMPERAT.

Indicates the temperature measured by the electronic probe on board.

ALIMENT(V)

Indicates the power supply voltage in Volts.

Advertising