JLG X20J Plus Operator Manual User Manual
Page 172
11. CHECKS TO BE COMPLETED ON THE MACHINE FOLLOWING REPAIRS
11.1 CHECKING CORRECT OPERATION OF THE CONTROLS
‑ From the ground make sure that the controls operate the machine smoothly.
‑ For correct operation of the controls, see the relevant paragraph.
11.2 CHECKING OPERATION OF THE SAFETY DEVICES
Make sure that all the safety devices work as described in this manual.
BOOM LIFT MODELS X20JPLUS
JLG
168
X20JPR0020413
CODE
DESCRIPTION
STATUS
ACTION
253
Mains voltage higher
than maximum ope‑
rating range toleran‑
ce.
Battery charger won’t start
charging until mains voltage
returns within normal opera‑
ting range.
Make sure mains voltage is
within correct operating
parameters.
244
Mains voltage lower
than maximum ope‑
rating range toleran‑
ce.
Battery charger won’t start
charging until mains voltage
returns within normal opera‑
ting range.
Make sure mains voltage is
within correct operating
parameters.