2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 13)

Before You Start 2.2
13
2.2 Before You Start
Product Completeness Check
Please check the product for completeness before installation. The package should
include the following pieces:
n 2N ® EasyRoute
n 1 GSM+UMTS antenna
n 1 supply adapter
n 1 telephone cable
n 1 network cable (Fast Ethernet RJ45)
n Quick Start Manual
n CD containing User Manual and other information
Installation Requirements
n 2N ® EasyRoute is designed for vertical mounting on suspension holes (use the
included template for wall drilling). This position is the best for signal
reception because a vertical antenna is used. 2N ® EasyRoute can be operated
in the horizontal position too where the GSM signal is good.
n Install 2N ® EasyRoute with respect to the GSM signal strength – check the
signal strength using the 2N ® EasyRoute web interface.
n Place 2N ® EasyRoute out of range of sensitive devices and human bodies to
minimize electromagnetic interference.
n For the allowed range of operating temperatures refer to the Technical
Parameters chapter.
n It is impossible to operate 2N ® EasyRoute on sites exposed to direct solar
radiation or near heat sources.
n 2N ® EasyRoute is designed for indoor use. It may not be exposed to rain,
flowing water, condensed moisture, fog, etc.
n 2N ® EasyRoute may not be exposed to aggressive gas, acid vapours,
solvents, etc.
n 2N ® EasyRoute is not designed for environments with high vibrations such as
means of transport, machine rooms, etc.
Caution
n Make sure that you are provided with all necessary technical devices – SIM
with UMTS data connection support, an analogue telephone set or a PBX
with a free external analogue interface (FXO), a PC, or a fax machine (for
ERF).