2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 60)

Table of Programmable Parameters 3.2
60
WLAN > Basic
Enable
Enable/disable the WiFi transmitter.
Network name (SSID)
SSID (Service Set Identifier) is a string of up to 32 characters sent as a unique
WiFi network identifier to users.
Channel
Set the channel to be used in the particular WiFi bandwidth (2.4/5 GHz) manually
or automatically.
Setting options: Auto
Available channels
Tx power
Set the Tx power for the gateway WiFi transmitter.
Setting options: Auto
Max
0–17 dBm
Beacon
Set the beacon frame for regular SSID sending onto the WiFi interface.
Setting options: 15–65,535 ms
RTS
The RTS value gives the packet size limit in bytes below which the CSMA/CA and
above which the RTS/CTS flow control should be used. Set the parameter to the
maximum value in the AP mode.
Setting options: 0–2346 B
Frag
Set the maximum size of packets for a wireless network.
Setting options: 0–2,346 B
WLAN > Security
System
Set the 2N ® EasyRoute WiFi interface security system.
Setting options: OFF
WEP
WPA
WPA2
WPA+WPA2
Key format
Set the WiFi interface security key format.
Setting options: ASCII/HEX