2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 31)

Table of Programmable Parameters 3.2
31
Frequency bands
Set the frequency bands to be used by 2N ® EasyRoute for GSM connections. The
available bands for the selected SIM, Module and Region are highlighted.
Caution
n By setting a frequency band you disable 2N ® EasyRoute from using the
optimum frequency band, which may decelerate your data transmission
and deteriorate the VoIP call and FAX transmission quality. 2N ® EasyRoute
continuously evaluates the signal intensity and adjusts the frequency
bands accordingly to optimise the available connection options. Thus, we
recommend you to keep the factory settings.
n This parameter does not affect the other settings on the page. It just
specifies the frequency band for 2N® EasyRoute.
Selection mode
Define how the provider should be selected: either Manually, in which case be
sure to fill in the Provider code below, or Automatically, in which case the
optimum provider is selected automatically, or Deregister, in which case the SIM
logs out.
Operator code (MCC+MNC)
The provider code is an identifier consisting of the Mobile Country Code (MCC) and
the Mobile Network Code (MNC). Use the parameter to select the provider to
which 2N ® EasyRoute with a SIM should log for roaming purposes. Just select a
provider from the list of available networks and the provider code will be set
automatically.
Setting options: 5-6 characters [0-9], MCC – 3 digits, MNC – 2-3 digits
Access technology
Select the GSM/UMTS login technology. This parameter does not affect the final
Internet connection technology selection.
HSDPA/HSUPA settings
Select a category to define the GSM/UMTS module rate. Default values of modern
high speed modules may cause troubles in some networks. If this is your case,
select a lower data rate category here.
Available networks
List of available mobile networks to which your 2N ® EasyRoute can log in. The
gateway only works if logged in to a network that enables roaming for the
gateway SIM card provider.
Tip
n Click on Scanner to display the up-to-date list of available networks.
Having searched the GSM/UMTS network according to the available band,
access technology and provider settings, 2N® EasyRoute shall provide a
list of available networks.