2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 57)

Table of Programmable Parameters 3.2
57
SETUP Menu > Network
LAN
IP
IP address assigned to 2N ® EasyRoute for gateway configuration or SMS/call
administration via the web interface.
Default setting: 192.168.1.1
Subnet
Mask of the network in which 2N ® EasyRoute is operating.
Default setting: 255.255.255.0
Enable custom DNS
Enable the functions for the selected DNSs. These servers will primarily be used
for the functions.
DNS1/DNS2
Set the IP addresses of the user-preferred DNS in the Internet.
Setting options: Valid network address of the DNS
LAN1 – LAN4/WAN
The interfaces connected are displayed. If you connect the cable to the
2N® EasyRoute switch, you get the connection rate and type for each port. If you
enable the WAN port, LAN4 is converted into WAN.