2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 83)

Voice Function 4.1
83
2N ® EasyRoute signals dialling end and starts establishing a call to the pre-
programmed number automatically – from now on 2N ® EasyRoute behaves as if
processing a standard outgoing call. Any dialling during the BabyCall timeout cancels
this function and a standard outgoing call can be made.
16 or 12 kHz Tariff Pulses
2N ® EasyRoute has a tariff pulse transmitter. You can use the pulses for outgoing call
metering and/or billing. 2N ® EasyRoute offers pseudo tariff metering only – its tariff
pulses do not correspond to the provider’s call tariffs but are transmitted according to
the pre-programmed parameters. Remember to program the routing table parameters
in order to set tariff metering for calls with different prefixes.
You can also program 2N
® EasyRoute to transmit tariff pulses as call
connect/disconnect signalling if your PBX cannot receive telephone line polarity
reversal signalling.