2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 16)

Telephone Line Connection 2.4
16
2.4 Telephone Line Connection
PBX Connection
Connect 2N ® EasyRoute to a vacant CO line of your PBX. Configure your PBX in such a
manner that UMTS and GSM (VoIP for EFR) outgoing calls are routed to
2N ® EasyRoute.
Tip
n 2N ® EasyRoute - ER is equipped with the FSK-based CLIP function. If your
PBX is able to process the caller’s ID, you are advised to enable this
function.
n 2N ® EasyRoute - ERF is equipped with an FSK/DTMF-based Calling Line
Identification (CLIP) function.
Telephone Set (Answering Machine,
Coin Telephone Station, Fax) Connection
You can connect a standard telephone, an answering machine or any other FXO-
interface terminal to 2N ® EasyRoute.
In addition to the above mentioned devices, you can connect an analogue FXO-
equipped fax machine to your 2N ® EasyRoute - ERF.
Tip
n 2N ® EasyRoute - ER is equipped with the FSK-based CLIP function. If your
PBX is able to process the caller’s ID, you are advised to enable this
function.
n 2N ® EasyRoute - ERF is equipped with an FSK/DTMF-based Calling Line
Identification (CLIP) function.