2N Lift emergency phone 2N LiftNet - Manual, 1446 v1.8.3 - Manual (Page 15)

Upgrade and Innovations 1.3
15
1.3 Upgrade and Innovations
Manual
version Upgrade an innovations
1.8.0 In firmware 1.8.0
 New Fireman function (fire call setup from the Fire Station to the
cabin in the shaft with the lowest address)
1.7.0 In firmware 1.7.0
 New Alarm – intercom function (alarm call setup to the machine
room audio unit)
 This new function can also be used for setup of a checking call to
the machine room audio unit
1.6.0 In firmware 1.6.0
 Added parameter 932 (cabin audio unit loudspeaker volume
control for alarm and incoming calls)
1.5.8 In firmware 1.5.8
 Added Italian voice menu
 Support of new audio units - 913613E and 913613WBE
1.5.5 In firmware 1.5.5
 Added parameter 990 (System settings)
 Automatic restart of audio units for CU – audio unit communication
monitoring (WatchDog)
1.5.2 In the manual
 Modified description in Subs. 2.5 Audio Unit - Machine Room
In firmware 1.5.2
 New voice menu
 Added system messages (page 59)
 Shorter timeout for the first “Wait please” message after
emergency call activation
 Added parameters 978, 979
 New default value for parameter 914 (delayed call set to 0
seconds, CANCEL still active)