2N BRI Lite/Enterprise v1.2 - Manual (Page 13)

13
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2.1 Before You Start
Caution
Make sure that you are equipped with all system components
necessary for putting
in operation 2N® BRI Enterprise / Lite
(SIM card, ISDN phone and/or duly configured ISDN BRI line of
your PBX or PSTN, an available Ethernet/USB socket and a PC
for initial gateway configuration).
Product Completeness Check
Before installing this product, check whether the gateway delivery complies 2N BRI
®
with the following packing list:
Package BRI Lite BRI Enterprise
2N BRI Enterprise / Lite
® 1 1
Power supply adapter 1 1
Long antenna 1 – 2* 1 – 2*
Ethernet cable 1 1
BRI ISDN cable 1 2
Wall mounting set 1 1
*depends on the Part No.
Connector Lay–Out – Lower Side
The following connectors are available on the BRI gateway bottom:
Connector type BRI Lite BRI Enterprise
DC Jack 2.1mm supply connector YES YES
10/100BaseT Ethernet connector YES YES
ISDN BRI TE interface NO YES
ISDN BRI NT interface NO YES
ISDN BRI NT/TE interface YES NO