2N BRI Lite/Enterprise v1.2 - Manual (Page 61)

61
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Note
Before enabling roaming, please use your mobile phone to make
sure that the GSM/UMTS searching priorities have been set
properly on the SIM card.
Caution
Calls via a roaming network may increase your telephone call
costs!
CLIR – enable/disable presentation of the SIM CLI on the called party's
telephone. CLIR is recommended for the SIM card inserted in the GSM module to
avoid CallBack problems.
Caution
The and Temporary CLIP enable Temporary CLIR enable
services must be supported by the GSM/UMTS provider's
network. Otherwise, the call may be rejected by GSM/UMTS!
Maximum number of called minutes – define the maximum count of minutes to
be called within a month via the selected SIM card.
SMS messages number – define the maximum count of SMS messages to be sent
within a month via the selected SIM card.
Day of restoring call limit and delete statistics – select a day in a month on which
the
and statistics shall Max count of called minutes Count of SMS messages
be deleted.
First count – set the length of the first pulse after which the pulse counting
change starts as defined in the
parameter. Next count
Next count – set the length of one pulse in seconds after the time defined in the
parameter elapses. First count
Note
Set the two parameters above ( , ) First count Next count
properly to count free minutes on SIM cards correctly. These
parameters are used for limiting outgoing calls depending on
free minutes. The CDRs contain real data.
Day limit of called minutes – set the maximum count of minutes to be called
within a day via the selected SIM card.
Time limits
There are two SIM use time limits in a GSM group.