2N BRI Lite/Enterprise v1.2 - Manual (Page 52)

52
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Caution
A PIN–active SIM card with a PIN value other than that set in
the GSM gateway configuration will be blocked by the gateway
with the 'pin–err' cause. Enter the correct PIN on your mobile
phone to unlock the SIM card!
End of dialling (empty=off) – set the DTMF code for DTMF dialling end for DISA
incoming calls. The default value is „#".
List of emergency numbers
The window displays a list of emergency numbers, which are normally routed to the
BRI interface. If the BRI line is disconnected, the emergency numbers are dialled
automatically via any GSM/UMTS module according to the following rules:
Search of a logged–in GSM/UMTS module (regardless of free minutes);
Search of a blocked or network searching GSM/UMTS module.
The table includes an exact format of the number to be called (112,911, etc.). The 'x p '
laceholder stands for any digit in the number to be called. The ' }'_ placeholder means {
the rest of the number. For example:
Format Allowed numbers
123 123 only
14x0 1400,1410,1420,…1490
999_ All numbers starting with 999
VoIP parameters
VoIP functions
Day of deleting statistics on VoIP (every month) – set the day for automatic
deletion of call statistics via the VoIP interface. None = statistics will not be
deleted automatically.
SIP protocol settings
Use CLIP from INVITE field – define that CLIP from the 'Contact' or 'From' field
shall be used for call routing to GSM/UMTS.
Send 180 ringing instead of 183 session progress.
Send 200 OK instead of 180/183.
Send 200 OK and BYE when rejected from GSM.
Send 200 OK on REGISTER request – virtual registration of device in 2N BRI
®
gateway (for registration requiring equipment).
Replace CLIP from GSM with Caller ID.
Deny DTMF according to RFC2833.
Forward DTMF for ME.