2N BRI Lite/Enterprise v1.2 User Manual
Page 88
88
G: repeated
SABME
Repeated unsuccessful send of packet SABME
H: repeated DM Repeated unsuccessful send of packet DM
I: failed
(TIMREC)
Unsuccessful breaking–up of status TIMREC
J: N(R) error
Received wrong value N(R) – numbering of packets
K: recv.FRMR
Received packed FRMR (information about error)
L: undef.frame
Received unknown type packed
M: (I field)
Received wrong I–packet (numbered packet)
N: frame size
Received packed with wrong length
O: N201 error
Value N201 was exceeded (max. length of packet)
L3–ERR
tout sts #
(p##)
Error of 3. layer isdn: timeout in status # on channel p##
G2–ERR
ATD/ERROR init
(g##)
Error of 2. layer isdn: restart of module g## after
rejected command ATD by GSM network
GSM Cause 150
(g##)
Error of 2. layer isdn: restart of module g## after cause
150 was received (call barred by GSM network)
G3–ERR
tout sts #
(g##)
Error of 3. layer isdn: timeout in status # on module g##
C4–ERR
tout sts #
(p##/g##)
Error of 4. connecting layer: timeout in status # on call
between channel p## and GSM module g##