2N BRI Lite/Enterprise v1.2 - Manual (Page 48)

48
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Gateway control
Gateway control helps you:
Monitor the current state of each GSM gateway parts;
Check and set the GSM gateway licence;
View and save the LOG file and CDR.
Firmware / Licence
Use this window to display information on the gateway licence status, firmware and
bootware versions and Ethernet interface MAC address. You can enter a new licence
code here.
Firmware version – displays the current firmware version for the GSM gateway
connected.
Bootware version – displays the current bootware version for the GSM gateway
connected.
MAC address – shows the MAC address of the GSM gateway Ethernet interface.
CPU serial number – shows the GSM gateway serial number in the
M203–xxxxxxxxxx.bin format.
Active – protocols allowed by the licence:
SIP – SIP support;
MExx – Mobility Extension support, where 'xx' means the maximum count
of users;
G729 – G.729ab voice codec support;
DSS1 – ISDN BRI DSS1 protocol support;
TUN – GSM–CSD remote supervision support.
Gateway limitation – displays the gateway operation limit (or licence limitation).
Licence status – displays the current licence status (unlocked/locked).
Caution
When the licence code expires, the licence–based protocols will
be locked!
Networks – displays the list of allowed/disallowed GSM/UMTS networks.
Tip
Upon the dealer's request, the gateway may be locked against
certain types of GSM/UMTS networks. This state is signalled by
a red LED Ch 1/Ch 2 and a 'netw–err' cause in the GSM module
diagnostic window.
Contact your dealer please for more information.
Licence key for gateway – helps you insert a new GSM gateway connection
licence.
Caution
By inserting a new licence code you restart the GSM gateway
and discontinue all the currently made calls!