3 digital key system terminal parameter settings, Basic – 2N NetStar Assistant manual User Manual
Page 40
40
4.3 Digital Key System Terminal Parameter
Settings
Click on the
menu and select the required station to set parameters for
Telephones
the digital key system terminals. The following five–item menu gets displayed.
Basic
Station active – use the option to mark a station active or inactive. An inactive
station is inaccessible for other users (all incoming calls are terminated), but can
set up calls.
Mobility Extension – use the option to enable station ringing if the call is routed
to the station user. If this option is not checked off, the station is not alerted
when the call is routed to its user but is alerted when the call is routed to the
station itself.
Enable CLIR – use to parameter to restrict the calling line identification. You can
also use a service or a programmable button function of the key system phone to
enable CLIR.
Alarm clock – use the option to set the alarm service for a user station. Click on
Set alarm clock to display a window to set the date, time and user station to be
called at the set time by the
PBX. If the first incoming call is not
2N NetStar
®
answered, two more calls will be made. Push Cancel alarm clock to deactivate the
alarm.