2N NetStar Assistant manual - Manual (Page 73)

73
6.8 Hotel Management
The Hotel view is a special licenced view of the PBX used when your stru 2N NetStar
®
cture is a Hotel. This selection is made in the initialisation wizard upon the first PBX
installation, or after the factory reset. The menu gives a clear overview of hotel floors
and apartments/rooms. The tag provides two types of PBX view:
and Simple view
. Hotel view
The displays all floors (groups) and apartments (stations) including their Simple view
profiles, which can be modified. This view is useful, for example, for the reception clerk
to see which room is currently vacant and set the reservation/cleaning request
promptly.
The is the other option. This view displays a similar structure enhanced Hotel view
with additional settings. You can unpack floors (groups) as you currently need them
without searching the page. Moreover, the Emergency alarm control element is
permanently available to all groups.
Refer to the figure below for the Hotel view.