Web configuration interface 3.4, Caution, Gsm incoming groups – 2N VoiceBlue Next v3.0 User Manual

Page 59

Advertising
background image

Web Configuration Interface

3.4

59

Tariff 2 = free minutes for calls to other GSM/UMTS networks;

Tariff 3 = free minutes for calls to the PSTN;

Tariff 4 = free minutes for calls within a closed user group (VPN).

Set the LCR table (assign prefixes to tariffs) correctly to ensure full functionality of
this feature. If routing to a specific tariff is not applied in the LCR table, global free
minutes will be used.

Free minutes
Count of free minutes for a specific tariff offered by the provider.

Transferred minutes
Maximum count of unused free minutes to be transferred to the next period.

Day of restoring free minutes
Day on which the free minute counters are to be reset automatically. Choose
every 24 hours, a day in a month, or a day in a week for restoring.

Week of restoring free minutes in month
Define the week in which the free minute counters are to be reset
automatically. This setting is useful when counter reset takes place on „every
other Friday in month‟. Otherwise, leave the „every‟ value.

Caution

We recommend you to set the free minute counter value to X-5, where X
is the count of free minutes obtained from the GSM/UMTS provider to
avoid limit excesses.

The manufacturer is not liable for any additional call costs in case the
GSM/UMTS provider‟s free minute/SMS limits are exceeded.

GSM incoming groups

2N

®

VoiceBlue Next allows you to work with two groups of incoming calls for each

of which you can set variable connection set-up modes.
General settings

Mode – set how the gateway should process incoming GSM calls:

o Reject incoming calls – all incoming GSM calls are automatically

rejected.

o Ignore incoming calls – all incoming GSM calls are ignored. The calling

subscriber gets the check ringing tone.

o Accept incoming calls + voice message – incoming GSM calls are

received and, if preset so, the DTMF dial-in with a voice welcome note is
activated.

o Accept incoming calls + dialtone – incoming GSM calls are received and,

if preset so, the DTMF dial-in function with a simulated secondary
dialtone is activated.

o CallBack after ring / Reject – in case the CallBack table includes the

CLIP, a CallBack is made. CLIP-less incoming calls are rejected.

o CallBack after ring / Ignore – in case the CallBack table includes the

CLIP, a CallBack is made. CLIP-less incoming calls are ignored.

Advertising