At interface, Basic commands, S.4.2 – 2N VoiceBlue Next v3.0 User Manual

Page 69: 2 at interface, At interface 4.2

Advertising
background image

AT Interface

4.2

69

4.2 AT Interface

2N

®

VoiceBlue Next uses the list of AT commands derived from the standard AT set for

configuration and monitoring purposes.

The configuration entering commands start with AT%parameter_id.

The configuration writing out commands start with AT&section.

The following list of AT commands is universal and some commands may not be
included in 2N

®

VoiceBlue Next.

Basic Commands

System

Information

ATI3

Firmware version and copyright

ATI4

Factory number

Statistics

AT&T

Statistics of calls via PRI interface

AT&TIN

Statistics of incoming calls via GSM modules

AT&TOUT

Statistics of outgoing calls via GSM modules

AT&T##

Statistics of calls via SIM cards of GSM module ##

AT%TPR=mi,ci,mo,co

Setting of statistics via PRI

AT%TG0=mi,ci,0,0

Setting of statistics of incoming calls via all GSM modules in GSM

group 0

AT%TG#=mi,co,ri,ro

Settings of statistics of GSM group #

AT%TGALL=mo.co,ri,ro

Settings of statistics of all GSM groups

AT%T##=#,mi,ci,si,mo,co,so

Settings of statistics of SIM card # of GSM module ##

AT%T##=ALL,mi,ci,si,mo,co,so

Settings of statistics of all SIM cards of GSM module ##

AT%TALL=ALL,mi,ci,si,mo,co,so

Settings of statistics of all SIM cards of all GSM modules

Description of parameters:

Mi/mo > Minutes of incom./outg. calls

Ci/co > number of connected incom./outg. calls

Ri/ro > number of re-routed incom/outg. calls in group

Si/so > number of received/sent SMS messages

! When you change these parameters, all the other counters will be reset!!

Wireless Engines

AT&Q##

Received GSM signal level (##=00-15)

AT&QALL

Received GSM signal level from all GSM modules

AT&Gxx=atcmd

Send command for AT commands directly to GSM module

AT&Gxx=at+cnum – SIM card telephone number

AT&Gxx=at+cpin=”xxxx” – PIN entering

AT&Gxx=at+clck=”sc”,1”xxxx” - PIN request enable

AT&Gxx=at+clck=”sc”,0”xxxx” - PIN request disable

LOG and CDR List

AT&L

Log file listing (PRIGW awaits pressing of the Space bar after every

20 lines)

AT&C

Call file listing (PRIGW awaits pressing of any key after every 20

lines)

Advertising