Web configuration interface 3.4, Caution – 2N VoiceBlue Next v3.0 User Manual

Page 60

Advertising
background image

Web Configuration Interface

3.4

60

o Report to PC + voice message – the GSM gateway sends information on

incoming calls to a PC equipped with the call routing software. The
DTMF dial-in with a voice welcome note can be activated for incoming
calls.

o Report to PC + dialtone – the GSM gateway sends information on

incoming calls to a PC equipped with the call routing software. The
DTMF dial-in with a simulated secondary dialtone can be activated for
incoming calls.

Minimum digits in DTMF – set the minimum count of digits to be required by
the gateway for DTMF dial-in.

Maximum digits in DTMF - set the minimum count of digits to be accepted by
the gateway for DTMF dial-in.

DTMF dialling timeout [s] – set the time for the GSM gateway to wait for the
first / next DTMF digits. If you set this parameter to 0, the incoming call is
automatically connected to the numbers included in the List of called
numbers
.

Day of deleting GSM incl. group statistics - define a day in a month on which
the statistics on incoming calls should be deleted.

Prefix before DISA dial-in – enter a numerical prefix to be automatically
inserted before the DTMF dial-in.

CLIP – use this parameter to modify the CLIP from GSM/UMTS networks. „+‟
is removed automatically from international identifiers. Use „-‟ to remove a
digit. Examples (GSM

CLIP +420600123456)

:

Parameter

CLIP to
VoIP/PRI 1

Note

Null

420261301500

No CLIP change

+

+420261301500 + inserted before CLIP received

00

00420261301500 00 inserted before CLIP received

--

0261301500

First two digits removed from CLIP received

---99

99261301500

First three digits removed from CLIP received,
prefix „99‟ added

Looping of voice message – set the voice message playing time.

Send CLIP from GSM/UMTS to VoIP

Transfer CLIP from GSM/UMTS – enable/disable the function.

Separating char – enter the character to separate the calling SIM card CLIP
and ID extension to be called.

Modify – modify the ID extension.

Caution

The Send CLIP from VoIP to GSM service must be supported by the
GSM/UMTS provider. If not, not, the provider‟s network may reject the
call!

Advertising